Summary:High Mast Pole Lighting Assemblies
When it comes to lighting applications, a High Mast Pole is an excellent choice. Located at high levels ...
High Mast Pole Lighting Assemblies
When it comes to lighting applications, a High Mast Pole is an excellent choice. Located at high levels above the ground, these poles can provide illumination to large areas efficiently. They also have features that make maintenance easier, such as a Maintenance Carriage Ring that can lower to ground level. The locking mechanism in a High Mast Pole utilizes gravitational force to secure the lights to the pole, which eliminates the need for levers and springs. The pole's German-made winch driving motors are engineered to provide dependable operation over time.
The details of a High Mast Pole can be found in TxDOT's Standard High-Mast Illumination Pole (HMIP) standard. The standard specifies pole heights of 100, 125, 150, and 175 feet, as well as the wind speeds at which they are intended to be used. The wind speed required for these heights is calculated from the standard sheet Wind Velocity and Ice Zones. When a high-mast pole is fabricated at an approved fabrication plant, a shop drawing is not required. Item 614 specifies the electrical working parts of high mast lighting assemblies, including luminaires, wire rope, rings, and obstruction lighting. The standard also specifies hoisting assemblies, power drive assemblies, and all electrical components.
In addition to providing improved visibility for drivers, High-Mast Light Poles also offer safety benefits. They can be placed outside of the clear zone, eliminating the need for extensive traffic control. Since high-mast lights can be set back a considerable distance, they are also safer for maintenance workers and drivers. Furthermore, one or two people with a pickup truck can perform maintenance tasks alongside traffic. In addition to being safer for drivers, High-Mast Light Poles can also lower energy costs.
For proper installation, High Mast Lighting Assemblies must conform to the following standard specification items. The flange plate on the base of the pole secures the pole to the foundation. The anchor bolts must be bonded into the foundation block. In addition, the pole must have the required number of luminaires. Ultimately, you will want to choose the High Mast Pole that best matches your lighting needs. They should not be positioned too far apart.
Another way to save money on High-Mast Lights is to convert the existing fixtures to LED. However, converting the existing fixtures is not always the best solution. You have to be careful not to compromise the pole or install lighting fixtures that don't fit. Likewise, if the existing lighting isn't in proper condition, the warranty won't do much good. If you have to repeat the lighting project, the initial savings will look very different.
There are four types of luminaries available. Each one has its own advantages. LEDs work well with dimmers and photo-sensors. The controls of these lights can also lower the High Mast Pole. The lighting options are nearly endless. With so many choices to choose from, it's important to choose the right one for your project. When considering High Mast Lighting, make sure that you choose the best option for your lighting needs.
